Insert Molded Coils - Product Summary Page

General Specifications

    Series Descriptions -                    (Click on Series name to link to the parts detail page)

2901s.gif (2474 bytes)

Link to 2901 Series page.

 2901 Series                 General Specs
9.65 x 5.84 mm body size
Unshielded
7.37 mm Lead Spacing
27nH - 140nH, 1 1/2 - 10 1/2 Turns
Tolerance = +5%

2101s.gif (6900 bytes)

Link to 2101 Series page.

 2101 Series                 General Specs
24.1 x 12.2 mm body size
Unshielded
9.52 mm Lead Spacing
0.046uH - 1.27uH
1 1/2 Turns - 23 1/2 Turns
Tolerance = +5% to +20%

2303s.gif (3911 bytes)

Link to 2303 Series page.

 2303 Series                 General Specs
18.0 x 12.7 mm body size
Unshielded
10.36 mm Lead Spacing
0.049uH - 0.316uH
Tolerance = +5% to +20%

2308s.gif (3431 bytes)

Link to 2308 Series page.

 2308 Series                 General Specs
11.9 x 9.65 mm body size
Unshielded
7.37 mm Lead Spacing
0.044uH - 0.194uH
Tolerance = +5% to +20%

2427s.gif (4154 bytes)

Link to 2427 Series page.

 2427 Series                 General Specs
17.3 x 9.7 mm body size
Unshielded
Lead Spacing: 7.0 x 7.0 mm corners
0.058uH - 0.422uH
Tolerance = +5% to +20%

2428s.gif (3566 bytes)

Link to 2428 Series page.

 2428 Series                 General Specs
19.05 x 10.5 mm body size
Shielded
Lead Spacing: 7.0 x 7.0 mm corners
0.045uH - 0.282uH
Tolerance = +5% to +20%

2429s.gif (4154 bytes)

 Link to 2429 Series page.

2429 Series                 General Specs
11.9 x 9.7 mm body size
Unshielded
Lead Spacing: 7.0 x 7.0 mm corners
0.050uH - 0.592uH
Tolerance = +5% to +20%

2428s.gif (3566 bytes)

 Link to 2430 Series page.

2430 Series                 General Specs
13.1 x 10.5 mm body size
Shielded
Lead Spacing: 7.0 x 7.0 mm corners
0.044uH - 0.410uH
Tolerance = +5% to +20%

2431s.gif (4938 bytes)

 Link to 2431 Series page.

2431 Series                 General Specs
17.9 x 9.7 mm body size
Unshielded
Lead Spacing: 7.0 x 7.0 mm corners
0.550uH - 1.40uH
Tolerance = +5% to +20%

2428s.gif (3566 bytes)

 Link to 2432 Series page.

2432 Series                 General Specs
19.05 x 10.5 mm body size
Shielded
Lead Spacing: 7.0 x 7.0 mm corners
0.369uH - 0.896uH
Tolerance = +5% to +20%

2429s.gif (4154 bytes)

 Link to 2433 Series page.

2433 Series                 General Specs
11.2 x 6.8 mm body size
Unshielded
Lead Spacing: 4.5 x 4.5 mm corners
0.048uH - 0.465uH
Tolerance = +5% to +20%

2428s.gif (3566 bytes)

 Link to 2434 Series page.

2434 Series                 General Specs
12.0 x 7.62 mm body size
Shielded
Lead Spacing: 4.5 x 4.5 mm corners
0.038uH - 0.288uH
Tolerance = +5% to +20%

2429s.gif (4154 bytes)

 Link to 2435 Series page.

2435 Series                 General Specs
11.2 x 6.8 mm body size
Unshielded
Lead Spacing: 4.5 x 4.5 mm corners
0.0475uH - 0.245uH
Tolerance = +5% to +20%

2428s.gif (3566 bytes)

 Link to 2436 Series page.

2436 Series                 General Specs
12.0 x 7.62 mm body size
Shielded
Lead Spacing: 4.5 x 4.5 mm corners
0.039uH - 0.156uH
Tolerance = +5% to +20%

    General Specifications:

Item Specification
Operating Temperature: -40degrees.gif (99 bytes) C to +85degrees.gif (96 bytes) C
Temperature Rise: 25degrees.gif (99 bytes) C Max.
Inductance (See Notes):

Varies by part.  See product detail pages.
Q Min. (See Notes):
Test Frequency (See Notes):
Color:
Test Equipment:

L = HP4276A LCZ Meter
Q = HP4342A at specified frequency
DCR = MilliOhm meter
SRF = HP4191A

- Notes -

1) Q & L measured with 1/2" long wire (TCW#16) soldered along the coil leads and with one end flush with the bottom of the coil, then bent down 1/4" from stand-off at an angle of 90 degrees, except type 2901 with leads connected directly.

2) L Minimum measured with core halfway out of the top of the form, except type 2101, 2303 & 2308, without core.

3) Inductance greater than 0.1uH read at recommended Q meter frequency.

4) Inductance below 0.1uH calculated from readings taken at 50MHz.